Install Recessed Medicine Cabinet In Wall

How to Install a Recessed Medicine Cabinet in a Wall

Recessed medicine cabinets can be a great addition to any bathroom by providing an extra storage space for bathroom essentials while also offering a sleek, modern look. While they are a bit more difficult to install than surface-mounted medicine cabinets, the overall process is still relatively easy and can be completed in a few hours with the right tools and materials. ### Tools and Materials: - Safety glasses - Pencil - Tape measure - Level - Stud finder - Utility knife - Saw or oscillating multi-tool - Drill - Screwdriver - Hammer - Nails or screws - Drywall - Joint compound - Sandpaper - Paint or wallpaper (optional) - Recessed medicine cabinet - Mounting hardware - Silicone caulk - Goggles ### Step-by-Step Guide: 1.

Plan the Placement:

- Decide on the exact location of your recessed medicine cabinet. Make sure it is accessible and will not interfere with other fixtures in the bathroom. 2.

Find the Wall Studs:

- Use a stud finder to locate the studs in the wall. This will help you determine the best location for the cabinet and ensure that it is securely mounted. 3.

Mark the Cabinet Outline:

- Use a tape measure, pencil, and level to outline the exact dimensions of the recessed medicine cabinet on the wall. Make sure the outline is straight and level. 4.

Cut the Outline:

- Using a utility knife, saw, or oscillating multi-tool, cut along the outline you just made. Be careful and ensure that the cut is straight and clean. 5.

Install the Backer Board:

- If you have a drywall wall, you will need to install a backer board inside the opening to provide support for the medicine cabinet. Cut the backer board to size and secure it to the studs using nails or screws. 6.

Mount the Cabinet:

- Insert the recessed medicine cabinet into the opening and align it with the mounting holes. Use screws or nails to secure the cabinet to the backer board. 7.

Fill in the Gaps:

- Fill in any gaps between the cabinet and the wall with joint compound using a putty knife. Allow the joint compound to dry completely before moving on. 8.

Sand the Joint Compound:

- Once the joint compound is dry, sand it down until it is smooth and flush with the wall. 9.

Paint or Wallpaper:

- If desired, you can paint or wallpaper over the installed medicine cabinet to match the rest of the bathroom. 10.

Install the Cabinet Shelves:

- Install the shelves inside the recessed cabinet according to the manufacturer's instructions. 11.

Install the Cabinet Door:

- Attach the cabinet door to the cabinet frame according to the manufacturer's instructions. 12.

Apply Silicone Caulk:

- Apply a thin bead of silicone caulk around the edges of the medicine cabinet where it meets the wall. This will help to seal any gaps and prevent moisture from entering. 13.

Clean Up:

- Clean up any mess you made during the installation process. Remove any remaining joint compound, sawdust, or debris.
### Additional Tips: - Make sure to wear safety glasses and goggles throughout the installation process. - If you are unsure about any steps of the installation, consult with a professional. - If you are installing the medicine cabinet in a tile wall, you will need to use a diamond-tipped drill bit to cut the tiles. - Be patient and take your time during the installation process. Rushing can lead to mistakes.