How To Replace A Bathroom Sink And Cabinet

Replacing a bathroom sink and cabinet can be a daunting task, but it is definitely doable with the right tools and instructions. Here is a step-by-step guide to help you get the job done: ### Gather Your Tools and Materials Before you start, make sure you have all the necessary tools and materials. You will need: * A new bathroom sink * A new bathroom cabinet * A level * A measuring tape * A pencil * A drill * A screwdriver * A hammer * A putty knife * A caulk gun * Caulk * Plumber's putty ### Remove the Old Sink and Cabinet 1. Turn off the water supply to the sink. 2. Disconnect the water lines from the sink. 3. Remove the drain stopper. 4. Unscrew the nuts that hold the sink in place. 5. Carefully lift the sink out of place. 6. Remove the old cabinet. ### Install the New Cabinet 1. Place the new cabinet in the desired location. 2. Level the cabinet using a level. 3. Mark the location of the mounting holes on the wall. 4. Drill pilot holes for the mounting screws. 5. Screw the cabinet into place. ### Install the New Sink 1. Apply a bead of plumber's putty to the rim of the sink hole in the cabinet. 2. Place the new sink into the hole. 3. Tighten the nuts that hold the sink in place. 4. Reconnect the water lines to the sink. 5. Turn on the water supply and check for leaks. 6. Seal the gap between the sink and the cabinet with caulk. ### Finishing Touches 1. Install the drain stopper. 2. Clean up any mess. 3. Enjoy your new bathroom sink and cabinet! ### Tips * If you are not comfortable working with plumbing, it is best to hire a professional plumber to replace your bathroom sink and cabinet. * Be careful not to overtighten the nuts that hold the sink in place. * Use a level to make sure the sink and cabinet are level before you tighten the nuts. * Seal the gap between the sink and the cabinet with caulk to prevent water damage. * Clean up any mess immediately to prevent it from becoming a problem.