How To Remove A Bathroom Vanity Cabinet

How to Remove a Bathroom Vanity Cabinet

Removing a bathroom vanity cabinet may seem like a daunting task, but it can be accomplished with the right tools and a little know-how. Here's a step-by-step guide on how to remove a bathroom vanity cabinet:

Step 1: Prepare the Bathroom

Before you start, clear the bathroom of any obstacles and cover the floor with a drop cloth to protect it from water or debris. Turn off the water supply to the vanity and drain the sink by opening the faucets.

Step 2: Disconnect the Plumbing

Using a wrench or pliers, disconnect the water supply lines from the faucets. Then, detach the drainpipe from the sink using a screwdriver or a basin wrench.

Step 3: Remove the Mirror and Fixtures

If your vanity has a mirror, remove it by unscrewing the brackets that hold it in place. Next, detach any other fixtures such as towel bars or soap dispensers.

Step 4: Unscrew the Vanity

Locate the screws that secure the vanity to the wall and floor. Using a screwdriver or drill, unscrew them and set them aside.

Step 5: Disconnect the Electrical Outlets

If your vanity has any electrical outlets, turn off the power at the circuit breaker and disconnect the wires. Make sure to cap the wires to prevent any electrical hazards.

Step 6: Lift and Remove the Vanity

Carefully lift the vanity straight up and off the floor. If the vanity is heavy, ask for assistance. Once the vanity is clear of the floor, tilt it slightly to slide it out from under the sink.

Step 7: Remove the Backsplash

If your vanity has a backsplash, unscrew the screws or brackets that hold it in place and remove it.

Step 8: Clean Up

Once the vanity is removed, clean up any debris or water left behind. Check for any leaks or damage to the walls, floor, or plumbing.

Tips:

Turn off the water supply and electricity before starting any work.
Use a drop cloth to protect the floor from water or debris.
If the vanity is heavy, ask for assistance when lifting it.
Be careful not to damage the walls or floor when removing the vanity.
If you encounter any electrical wires, cap them immediately to prevent hazards.
If you are not confident in your DIY skills, consider hiring a professional plumber or contractor.