How To Install Cabinet Handles With A Template Kit

How to Install Cabinet Handles With a Template Kit

Cabinet handles are an essential part of any kitchen or bathroom design. Not only do they make your cabinets more functional, but they can also add a touch of style to your space. If you're replacing old cabinet handles or installing new ones for the first time, using a template kit can make the process much easier. Here's a step-by-step guide on how to install cabinet handles with a template kit:

Step 1: Gather Your Materials

Before you begin, make sure you have all of the necessary materials. You will need:

Cabinet handles
Template kit
Drill
Drill bit
Screwdriver

Step 2: Choose the Location of Your Handles

The first step is to decide where you want to install your handles. The most common placement is centered on the cabinet door, but you can also place them off-center or even vertically. Once you have decided on the location, use a pencil to mark the spots where you will drill the holes.

Step 3: Align the Template

Next, align the template kit with your marked spots. The template will have holes that correspond to the screw holes on your handles. Make sure that the template is level and seated against the surface of the door correctly.

Step 4: Drill the Holes

Once the template is aligned, use a drill to drill the holes. Be sure to use a drill bit that is the same size as the screws that came with your handles. Drill slowly and carefully, making sure not to drill too deep.

Step 5: Remove the Template

Once the holes are drilled, remove the template and discard it. You should now have two holes in your cabinet door, one for each screw.

Step 6: Install the Handles

Finally, it's time to install the handles. Insert the screws into the holes and tighten them until the handles are secure. Be careful not to overtighten the screws and damage the handles.

Step 7: Check Your Work

Once the handles are installed, check to make sure that they are straight and level. If they are not, carefully loosen the screws and adjust the handles until they are aligned.
Congratulations! You have now successfully installed cabinet handles using a template kit.