How To Easily Install Kitchen Cabinet Hinges Close Door

Installing kitchen cabinet hinges close doors is a simple task that can be completed in a few easy steps. By following these instructions, you can ensure that your cabinet doors close smoothly and securely.

Materials You'll Need

Cabinet hinges
Screwdriver
Drill (optional)
Measuring tape or ruler
Pencil

Step 1: Measure and Mark the Hinge Locations

Using a measuring tape or ruler and a pencil, mark the locations of the hinges on the cabinet door and the cabinet frame. The hinges should be placed an equal distance from the top and bottom of the door, and they should be spaced evenly apart.

Step 2: Drill Pilot Holes (Optional)

If you are using a drill, you can drill pilot holes for the screws. This will make it easier to drive the screws in without splitting the wood.

Step 3: Attach the Hinges to the Door

Place the hinges on the door and align them with the marks you made in Step 1. Drive the screws through the hinges and into the door.

Step 4: Attach the Hinges to the Cabinet Frame

Place the cabinet frame on top of the door and align the hinges with the marks you made in Step 1. Drive the screws through the hinges and into the cabinet frame.

Step 5: Adjust the Hinges

Open and close the cabinet door to make sure that it closes smoothly and securely. If the door is not closing properly, you may need to adjust the hinges. To adjust the hinges, loosen the screws that attach the hinges to the door and the cabinet frame. Then, move the hinges slightly until the door closes properly. Tighten the screws to secure the hinges once you have made the adjustments.

Step 6: Install the Cabinet Door Knobs or Handles

Once the hinges are installed, you can install the cabinet door knobs or handles. To install the knobs or handles, simply insert them into the holes in the door and tighten the screws.