How To Easily Install Kitchen Cabinet Hinges Closed

Installing kitchen cabinet hinges closed can seem like a daunting task, but it's actually quite simple with the right tools and a bit of patience. By following these step-by-step instructions, you can easily install your cabinet hinges and get your cabinets looking and functioning like new.

Tools and Materials

Before you begin, you will need to gather the following tools and materials:

Cabinet hinges
Screwdriver
Drill
Drill bit
Measuring tape
Pencil
Clamps

Instructions

Step 1: Measure and mark the hinge locations

Using the measuring tape and pencil, measure and mark the location of the hinges on the cabinet door and the cabinet frame. The hinges should be placed evenly spaced, typically 2-3 inches from the top and bottom of the door.

Step 2: Drill pilot holes for the hinge screws

Use the drill to drill pilot holes for the hinge screws. The pilot holes should be slightly smaller than the diameter of the screws. This will help to prevent the wood from splitting when you insert the screws.

Step 3: Attach the hinges to the cabinet door

Apply a small amount of wood glue to the back of the hinge plates. Place the hinges over the pilot holes and secure them with the screws.

Step 4: Attach the hinges to the cabinet frame

Line up the hinges on the cabinet door with the corresponding holes on the cabinet frame. Secure the hinges with the screws.

Step 5: Adjust the hinges

Once the hinges are attached, you may need to adjust them to ensure that the door opens and closes smoothly. Use the screwdriver to adjust the screws on the hinges until the door is aligned properly.

Step 6: Test the hinges

Open and close the cabinet door several times to test the hinges. Make sure that the door opens and closes smoothly and that there is no rubbing or binding.